RECODA New Item Car Reversing Camera IP67 Waterproof IR Day/Night
Megapixel AHD Camera
Main feature:
- Using the latest CMOS technology, the camera can produce high definition image with little distortion.
- Using the analog modulation technology to transfer progressive-scan HD Video signal.
- Using common 75-3 coaxial cable to carry out as far as 500 meters HD video without any video signal loss.
Specification:
| Model | AHD200M-RV1A |
| Pick up Device | 1/3 CMOS Aptina 0230 |
| Picture Elements | 1280(H)*1080(V) |
| Effective pixels | 2.0M pixels |
| Day-night mode | External control (default) / Auto / color / |
| | black and white |
| Infrared Spectrum | 850nm |
| S/N Ratio | More than 72 dB, (AGC Off) |
| Auto Gain Control | Auto |
| White Balance | Auto |
| Electronic Shutter | AUTO/ 1/50(1/60)-1/100,000sec |
| Auto |
| Back Light Compensation |
| Infrared LED | 18 LEDs |
| Infrared LED Range | 8 m |
| Video output | 1 Vp-p, 75ΩComposite, BNC x1 |
| Audio Output | N/A |
| OSD Control | Available |
| Power Consumption | 210mA |
| Lens | Standard f3.6mm Fixed Megapixel Lens |
| Lens Mount | M12XP0.5mm Thread |
| Tilt Adjusting | 0-90° |
| Video footage to take up | 1H ≈ 1.506 GB |
| space | |
| Power Supply | 12V DC ±10% |
| Dimensions(L x W x H) | W76 x H78 x D69 mm |
| Net Weight | 280g |
| Weatherproof | IP67 |
| Operating Temperature | -20°C to +50°C |
Image:
Operation procedures:
- Loosen the lock screws on the sun shield, remove the mounting bracket to the suitable position.
- Attach the mounting bracket to the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joint and secure the base by the supplied mounting screws.
- Connect the BNC to the monitor
- Connect the DC jack to 12VDC power source, when picture shown up on the monitor.
